PREVENT HARD BRICK SPARK WITH PC

MUST READ !!!

As some of the spark users may know the risk of the flashing stock ROM using pc,some don't,if you flash stock ROM using SP tools and do even a step wrong, your spark will show only a red notification light and not even turn on.If that happens your spark is bricked forever and u can't do anything about it.So if u bricked your ROM hardly and can't access recovery(but mmx logo comes), but you're afraid you might end up like the other guys, you can follow this Procedure:

Needs:

PC (Running on Windows XP / Vista / 7 / 8 / 8.1 / 10 or Upper version)
USB Cable
Micromax Canvas Spark
TWRP / PhilZ Recovery : 1.TWRP Recovery(link below)
SP Flash Tool (Download below)
Drivers :  1.ADB Driver     2.VCOM Driver (If you use Windows 8 or Upper version then follow the Steps of the Link)
Scatter File(Download below)
Process :

1.Open SP Flash Tool in “Run As Administrator”

2.Load the Scatter File.

3.Click on Recovery location and open the TWRP / PhilZ Recovery.img.

4.Uncheck all the box but make sure only the “RECOVERY” box is checked.

5.click on Download.

6.Then Power off your phone and connect USB Cable with PC.

7.After few second the green tick is appear in your PC.

8.And then unplugged your usb cable and turn on your phone in to recovery mode by pressing VOLUM UP + LOCK BUTTON and after Micromax logo appear the you go to recovery mode.

9.Then clear data and flash stock ROM.zip

10.Voilà !!!!! You are done. No need to worry about hard brick your spark ever again